J-SAP-TCSB5264 Analogue Addressable Manual Call Point 天成消防

品牌：营口天成

一、J-SAP-TCSB5264 Analogue Addressable Manual Call Point的概述

1.The MCP is mounted inside the wall.Unplug the point,put cables into the base's entrancehole and connect corresponding terminals.

2.Wiring instructions:BS,AS and BP,AP:two bus inputs of non-polarized signals.

二、J-SAP-TCSB5264 Analogue Addressable Manual Call Point的特点

•Plug-in structure.Simple and convenient installation

•Alarm by pressing,reset by a special key

•Non-polarized two-wire to the control panel

•Reusable

三、J-SAP-TCSB5264 Analogue Addressable Manual Call Point的技术参数

Operating voltage Loop 24V(18.5V~26V)
Operating current Standby current:≤0.2mA;
Alarm current:≤0.8mA
Temperature:-10℃~+55℃;
Relative Humidity:≤95% non-condensing
Coding method Electronically coding
Code range 1~255
Material and color of enclosure ABS;Red
Weight About 120g(with base)
Mounting hole distance 60mm
Dimension(L×W×H) 95mm×44mm×95mm(with base)